您好, 歡迎來到化工儀器網
| 產地類別 | 國產 | 護套材質 | 聚氯乙烯絕緣電力電纜 |
|---|---|---|---|
| 線芯材質 | 銅 |
產品簡介
詳細介紹
產品標準本產品按GB12706《額定電壓35kv及以下銅芯、鋁芯塑料絕緣電力電纜》標準生產，同時還可根據用戶需要按國際電工委員會推薦標準IEC、英國標準、德國標準及美國標準生產。
The product is manufactured according to the stand of GB12706 or IEC,BS,DIN and ICEA upon request.折疊編輯本段適用范圍本產品適用于工頻額定電壓0.6/1KV及以下配電網或工業裝置中固定敷設之用。
The product is suitable for use in power distribution lines or fixed insta-llations with rated power-frequency voltage up to and including 0.6/1KV.折疊編輯本段使用特性工頻額定電壓Uo/U為0.6/1KV。
Rated power-frequency voltage Uo/U:0.6/1KV.電纜導體的允許長期工作最高溫度為70℃Max.permissible continuous operating temperature of conductor: 70℃短路時(最長持續時間不超過5s)電纜導體的允許最高溫度:導體截面 ≤ 300mm2 – 160℃;導體截面 300 – 140>℃;Max.short-circuit temperature of the conductor shall not excssd: (5smaximum duration).Cross-section of conducter ≤ 300mm2 – 160℃;Cross-section of conducter > 300mm2 – 140℃,電纜敷設時環境溫度應不低于0℃。
The ambient temperature under installation should should not below0℃電纜彎曲半徑不小于電纜外徑10倍。
The bending radius of a cable should not be less than 10 times of the cable diameter. 電纜的型號Type of cable
The product is manufactured according to the stand of GB12706 or IEC,BS,DIN and ICEA upon request.折疊編輯本段適用范圍本產品適用于工頻額定電壓0.6/1KV及以下配電網或工業裝置中固定敷設之用。
The product is suitable for use in power distribution lines or fixed insta-llations with rated power-frequency voltage up to and including 0.6/1KV.折疊編輯本段使用特性工頻額定電壓Uo/U為0.6/1KV。
Rated power-frequency voltage Uo/U:0.6/1KV.電纜導體的允許長期工作最高溫度為70℃Max.permissible continuous operating temperature of conductor: 70℃短路時(最長持續時間不超過5s)電纜導體的允許最高溫度:導體截面 ≤ 300mm2 – 160℃;導體截面 300 – 140>℃;Max.short-circuit temperature of the conductor shall not excssd: (5smaximum duration).Cross-section of conducter ≤ 300mm2 – 160℃;Cross-section of conducter > 300mm2 – 140℃,電纜敷設時環境溫度應不低于0℃。
The ambient temperature under installation should should not below0℃電纜彎曲半徑不小于電纜外徑10倍。
The bending radius of a cable should not be less than 10 times of the cable diameter. 電纜的型號Type of cable