您好, 歡迎來到化工儀器網
Tank mounted return line filters 10 TE（N）
Via the outlet, the filtered hydraulic fluid enters the tank. In case of contamination, the necessary filter element exchange is displayed by the maintenance
產品簡介
詳細介紹
Tank mounted return line filters 10 TE(N)
- Size 0040 … 2500
- Max. operating pressure 10 bar
- Flow, max. 1680 l/min
- Port G3/4, G1 1/4, G1 1/2, SAE 2", 3000 psi, SAE 2 1/2", 3000 psi, SAE 3", 3000 psi, SAE 4", 3000 psi, SAE 4", 3000 psi
- Operating temperature -10 … +100 °C
Tank mounted return line filters 10 TE(N)
- Filter für Tankanbau
- Special highly efficient filter media
- Filtration of very fine particles and high dirt holding capacity across a broad pressure differential range
- High collapse resistance of the filter elements
- Optionale Ausführung mit mechanisch-optischer Wartungsanzeige mit Memoryfunktion
- Optional equipment with various electrical switching elements, modular design
- Standardmäßige Filterausstattung mit einem Bypassventil im Filtergehäuse integriert
- Optional measuring port
Tank mounted return line filters 10 TE(N)
The tank mounted return line filter is provided in the return line for direct attachment onto the tank of a hydraulic or lubrication system. It can also be used as filling or bypass filter. It basically consists of filter head (1), filter bowl (2), cover (3), filter element (4) as well as a bypass valve (5), by default.
Optionally, the filter is equipped with mechanical/visual maintenance indicator (6). The electronic maintenance indicator is connected via the electronic switching element (7) with 1 or 2 switching points (see p. 7), which has to be ordered separay.
During operation, the hydraulic fluid reaches the filter housing via the inlet; here, it flows through the filter element (5) from the outside to the inside and is cleaned according to the filter rating. The dirt particles filtered out settle in the filter bowl (3) and in the filter element (5). Via the outlet, the filtered hydraulic fluid enters the tank. In case of contamination, the necessary filter element exchange is displayed by the maintenance indicator (7).
The electronic switching element (7) is attached to the mechanical/visual maintenance indicator (6) and held by means of a locking ring.
Depending on the filter size, more additional functions (only for NG0040 ... 0100) are available - e.g. a breathing filter (8), surge protection (9) or return pipes (10) in different lengths – in this connection, also refer to the chapter “Ordering code Accessories”.
