Specification : |
INPUT |
Voltage | 115/230 VAC ± 15% |
Frequency | 50/60 Hz ± 5% |
Fuse | 2A Slow-Blo 250V AC |
Line condition |
Power Switch | Reverse polarity switch for normal condition (on / off / auto setting) |
Neutral Switch | Neutral switch on/off selection for single fault condition |
Ground Switch | Ground switch on/off selection for class I single fault condition |
Probe Setting |
Surface to Surface (PH- PL) |
Surface to Line(PH - L) |
Ground to Line (G - L) |
Ground to Neutral (G - N) |
Auto Function (G - N & G - L) |
SETTING |
Touch Current High Limit (RMS) | Range: | 0.0uA~ 999.9uA/ 1000uA~5999uA/ 6.00mA~20.00mA |
Resolution: | 0.1uA/1uA/0.01mA |
Touch Current Low Limit (RMS) | Range: | 0.0-999.9 uA |
Resolution: | 0.1uA |
Touch Current High Limit (Peak) | Range: | 0.0uA - 999.9uA/ 1000uA - 9999uA/ 10.0mA - 30.0mA |
Resolution: | 0.1uA/1uA/0.1mA |
Touch Current Low Limit (Peak) | Range: | 0.0-999.9 uA |
Resolution: | 0.1uA |
DISPLAY |
Touch Current Display (RMS) | Range 1 | 0.0uA~ 999.9uA, frequency DC - 1MHz |
Resolution | 0.1uA |
Accuracy | DC : ±2% of reading + 3counts
15Hz < f <100KHz : ±2% of reading + 3counts
100KHz < f < 1MHZ : ±5% of reading (10.0uA - 999.9uA) |
Range 2 | 1000uA~8500uA, frequency DC - 1MHz |
Resolution | 1uA |
Accuracy | DC : ±2% of reading + 3counts
15Hz < f <100KHZ : ±2% of reading + 3counts
100KHz < f <1MHZ : ±5% of reading (10uA - 8500uA) |
Range 3 | 8.00mA~20.00mA, frequency DC - 1MHz |
Resolution | 0.01mA |
Accuracy | DC : ±2% of reading + 3counts
15Hz < f < 1MHz : ±5% of reading (0.01mA -20.00mA ) |
Touch Current Display (Peak) | Range 1 | 0.0uA~ 999.9uA, frequency DC - 1MHz |
Resolution | 0.1uA |
Accuracy | DC : ±2% of reading +2uA
15Hz < f <1MHZ : ±10% of reading +2uA |
Range 2 | 1000uA ~ 8500uA, frequency DC - 1MHz |
Resolution | 1uA |
Accuracy | DC : ±2% of reading +2counts
15Hz < f <1MHz : ±10% of reading +2counts |
Range 3 | 8.0mA ~ 30.0mA, frequency DC - 100KHz |
Resolution | 0.01mA |
Accuracy | DC : ±2% of reading +2counts
15Hz < f < 100KHz : ±10% of reading +2counts |
Measuring Device Module |
MD1 | IEC60990 Fig4 U2, IEC 60950-1, IEC60335-1, IEC60598-1, IEC60065, IEC61010 |
IEC60990 Fig4 U1, IEC60065 |
MD2 | IEC60990 Fig5 U3, IEC60598-1 |
IEC60990 Fig5 U1 |
MD3 | IEC 60601-1 |
MD4 | UL544NP, UL484 , UL923, UL471, UL867, UL697 |
MD5 | UL544P |
MD6 | UL1563 |
MD7 | IEC60950, IEC61010-1 FigA.2 (2K ohm) for RUN Test MD Circuit. |
External MD | Basic measuring element 1k ohm |
MD Voltage Limit | 70Vdc |
Leakage Current Offset | Range: | 0 - 999.9uA |
Resolution: | 0.1uA |
DUT POWER |
AC Voltage | 0.0-277.0V |
AC Current | 40Arms max continuous |
Over Current Protection | 50Arms, Response Time < 3 sec / 250Apeak Response Time <10u sec |
AC Voltage High/Low Limit | Range: | 0.0-277.0V |
Resolution: | 0.1V/step |
AC Voltage Display | Range: | 0.0 - 277.0 V |
Resolution: | 0.1 volt / step |
Accuracy: | ±(1.5% of reading + 2 counts) , 30.0 - 277.0VAC |
Delay time setting | Range: | 0.2 !V 999.9 seconds |
Resolution: | 0.1 second |
Timer display | Range: | 0.0 !V 999.9 seconds |
Resolution: | 0.1 second |
Accuracy: | ± (0.1% of reading + 0.05 seconds) |
GENERAL |
PLC Remote Control | Input - Test, Reset, Interlock & Recall File 1 through10 |
Output - Pass, Fail, Test-in-Process, Start-Out, Reset-Out |
Scanner Control | It is applied to control Matrix Scanner (Model 7006) |
Memory | 50 memories , 30steps per each memory . Max. Result Display 900 data (30 memories x 30 steps) |
Auto Reverse Function | AUTO Reverse ON / OFF parameter setting selection
Automatic Reverse polarity switch for normal condition in one step setting menu.
Only display maximum leakage current value. |
Scope Output Interface | At rear panel BNC type to connet scope for some IEC standards test requirement and application. |
Display | 320 X 240 graphic LCD |
LCD Contrast Setting | Range: 1-9; 1 is lightest character, 9 is darkest character. |
Alarm Volume Setting | Range: 0-9; 0=OFF, 1 is softest volume, 9 is loudest volume. |
Security | Lockout capability to avoid unauthorized access to test set-up programs. |
Calibration | Software and adjustments are made through front panel,
Automatic Calibration alert function to signal operator when calibration is due. |
Results Display | All test result information will be displayed on the screen. |
Interface | RS232 standard |
Safety | Product with TUV/GS certificate |
Dimension | 430 (W) x 133(H) x 300 (D) mm |
Weight | 12 Kg |
STANDARD ACCESSORIES |
Power Cord | X1 |
Fuses | X2 (Including a spare contained in the fuse holder) |
Interlock Disable Key(1505) | X1 |
TC Receptacle Adaptor Box (1932) | X1 |
Hipot Test Lead for PH / PL (1101) | X2 |
RS232 Link Cable 1.5m(1130) | X1 |
DUT Power Cable 40A(1148) | X1 |
RUN Module (Opt.752) |
W | Range : 0-1KW / 1-10KW Resolution : 0.5W / 5W |
A | Range : 0.000 !V 3.500 A / 3.00 - 40.00A , Resolution : 0.001A / 0.01A |
PF | 0.000 -1.000 |
Leakage Current | Range : 0.00 - 10.00mA , Resolution : 0.01mA |
AC Current High/Low Limit Setting | Range: | 0-40A |
Resolution: | 0.01A/step |
AC Current Display | Range: | 0.000 !V 3.500 A / 3.00 - 40.00A |
Resolution: | 0.001A / 0.01A |
Accuracy : | ± (2 % of reading + 5 counts) / ± (2 % of reading + 2 counts) |
AC Power High/Low Limit Setting | Range: | 0 - 10KW |
Resolution: | 1W |
AC Power Display | Range: | 0.0 -1000.0W / 1000 - 10000W |
Resolution: | 0.5W / 5W |
Accuracy : | ±(2 % of reading + 2 counts ) |
Power Factor High/Low Limit Setting | Range: | 0.000 - 1.000 |
Resolution: | 0.001 |
Power Factor Display | Range: | 0.000 - 1.000 |
Resolution: | 0.001 |
Accuracy : | ± (2 % of reading + 2 counts ) |
Leakage Current High/Low Limit Setting | Range: | 0.00 - 10.00mA |
Resolution: | 0.01mA |
Leakage Current Display | Range: | 0.00 - 10.00mA |
Resolution: | 0.01mA |
Accuracy : | ± (2 % of reading + 2 counts ) |
Delay Timer Setting | Range: | 0, 0.2 - 999.9 |
Resolution: | 0.1 |
Dwell Timer Setting | Range: | 0, 0.1-999.9 (0=continuous) |
Resolution: | 0.1 |
Timer display | Range: | 0.0 - 999.9 seconds |
Resolution: | 0.1 second |
Accuracy: | ± (0.1% of reading + 0.05 seconds) |
Power Control | It is applied to control Transformer Box (1931/1931S) or AC Power Source(6700/6800/6400 Series) |
HV & GB Link Module (Opt. 753) |
Max. ACW 4000VAC, DCW 4000VDC & Max. Ground Bond 40A |
GPIB Interface Card (Opt. 731) |
Printer Port Interface Card (Opt. 732) |
Multi-function Interface Card (Opt. 751) |
Including USB port A type, combination of RS-232, RS-485 port, and Bar Code Input with internal memory capability. |
High Measurement Range 35mArms / 70mApeak & 4MDs (Opt. 754 ) |
35mArms / 70mApeak for IEC60990 fig4(U1 and U2), IEC60990 fig5(U1 and U3), UL484, IEC60601 Test Requiremt ,
Notice : Option this MD circuit have to replace MD module all MD circuits . |
Transformer Box (Option) Add this option must optional Opt.752 RUN Module. |
1931 Series Transformer Box
(500VA/ 1KVA/1.8KVA/3.6KVA) | Multi-Tape of 1.0, 1.06, 1.1 times of input voltage. |
1931-S Series Transformer Box
(500VA/ 1KVA/1.8KVA/3.6KVA) | Multi-Tape of 0.8, 0.85, 0.9, 1.0, 1.06, 1.1 times of input voltage. |
AC Power Source (Option) Add this option must optional Opt.752 RUN Module. |
6800 Series Digital AC Power Source (6805, 6810 , 6820 , 6830 and 6840 ) |
6700 Series Programmable AC Power Source (6705, 6710 , 6720 , 6730 and 6740 ) |
6400 Series AC Power Source (6402, 6403, 6405, 6410 ) |
