化工儀器網
產品簡介
Ossila材料F8T2 CAS：210347-56-1【代理Ossila材料、*、交期準時、歡迎新老客戶來點咨詢，更多Ossila產品，請我司銷售】
詳細介紹
只用于動物實驗研究等
Batch information
| Batch | Mw | Mn | PDI | Stock info |
| M501 | >50,000 | <3.0 | Out of Stock | |
| M502 | 136,320 | 53,866 | 2.53 | In stock |
Ossila材料F8T2 CAS：210347-56-1
General Information
| CAS number | 210347-56-1 |
| Chemical formula | (C37H44S2)n |
| Molecular weight | See batch information for details |
| HOMO / LUMO | HOMO = 5.5 eV / LUMO = 3.1 eV [1] |
| Synonyms | PFOT, Poly(9,9-dioctylfluorene-alt-bithiophene), Poly[(9,9-dioctylfluorenyl-2,7-diyl)-co-bithiophene] |
| Classification / Family | Polyfluorenes, Bithiophenes, Heterocyclic five-membered ring, Organic semiconducting materials, PLED green emitter materials, Organic Photovoltaics, Polymer Solar Cells, Light-emitting Diodes, OFET materials |
| Suggested Solvents | Chloroform, chlorobenzene or dichlorobenzene |
Ossila材料F8T2 CAS：210347-56-1
Chemical Structure
Chemical structure of Poly(9,9-dioctylfluorene-alt-bithiophene), F8T2, CAS No. 210347-56-1.
Poly(9,9-dioctylfluorene-alt-bithiophene), also known as F8T2, is a semiconducting material that is widely used in organic electronics such as organic photovoltaics, polymer light-emitting diodes (PLED) and organic field-effect transistors (OFETs). Comparing with poly-3-hexylthiophene, F8T2 has even higher mobilities of 0.1 cm2/V · s and relatively higher stability against chemical doping by environmental oxygen or residual impurities such as sulphonic acid in the PEDOT/PSS ink. This enables devices with higher on-off current ratios exceeding 105 and with better operating stability than printed poly-3-hexylthiophene devices[1].
The absorption in the blue region of F8T2 makes it an excellent donor polymer to blend with an acceptor having complementary spectrum or assemble a tandem cell with other low bandgap-conjugated polymers with absorption extended in the red region.
| Device structure | ITO/PEDOT:PSS/TFB/F8T2/Ca [3] |
| Color | Green  |
| Max. Luminance | 23,400 |
| Max. Current Efficiency | 3.68 cd/A |
| Max. Power Efficiency | 2.9 lm W−1 |
Literature and Reviews
- Annealing effect of polymer bulk heterojunction solar cells based on polyfluorene and fullerene blend, J-H. Huang et al., Org. Electronics, 10, 27–33 (2009), doi:10.1016/j.orgel.2008.09.007.
- High-Efficiency Polymer LEDs with Fast Response Times Fabricated via Selection of Electron-Injecting Conjugated Polyelectrolyte Backbone Structure, M. Suh et al., ACS Appl. Mater. Interfaces, (2015), DOI: 10.1021/acsami.5b07862.
- On the use and influence of electron-blocking interlayers in polymer light-emitting diodes, R. Jin et al., Phys. Chem. Chem. Phys., 11, 3455-3462 (2009). DOI: 10.1039/B819200F.
- High-Resolution Inkjet Printing of All-Polymer Transistor Circuits, H. Sirringhaus et al., Science, 290 (5499), 2123-2126 (2000), DOI: 10.1126/science.290.5499.2123.
- Organic Light-Emitting Diodes Based on Poly(9,9-dioctylfluorene-co-bithiophene) (F8T2), P. Levermore et al., Adv. Funct. Mater., 19, 950–957 (2009); DOI: 10.1002/adfm.200801260.
- Mobility enhancement in conjugated polymer field-effect transistors through chain alignment in a liquid-crystalline phase, H. Sirringhaus et al., Appl. Phys. Lett. 77, 406 (2000); http://dx.doi.org/10.1063/1.126991.
- Annealing effect of polymer bulk heterojunction solar cells based on polyfluorene and fullerene blend, J-H. Huang et al., Org. Electronics, 10, 27–33 (2009), doi:10.1016/j.orgel.2008.09.007.
- Hole mobility effect in the efficiency of bilayer heterojunction polymer/C60 photovoltaic cells, A. Macedo et al., Appl. Phys. Lett. 98, 253501 (2011); http://dx.doi.org/10.1063/1.3601476.