您好, 歡迎來到化工儀器網
產品分類品牌分類
-
充電樁 純水機 五參數氣象站 浮游菌采樣器 煙羽圖 一氧化碳分析儀 高錳酸指數分析儀 高錳酸鹽 數采儀 蒸餾儀 低本底能譜儀 能率儀 分析天平 布袋撿漏儀 爆炸探測儀 輻射熱計 黑球溫度計 指數儀 干燥箱 微壓計 紅外熱像儀 環保數采儀 測汞儀 輻射監測儀 場強儀 VOC氣體檢測儀 菌落計數器 濕球黑球指數儀 凱氏定氮儀 流速流量計 風量罩 微波泄露檢測儀 林格曼濃度圖 火焰模擬器 氣溶膠濃縮器 分光光度計 風速儀 數字照度計 明渠流量計 顆粒物采樣器 個人劑量報警儀 個人防護包 塵埃離子計數器 校準儀 恒溫恒濕稱重系統 激光甲烷檢測儀 氮吹儀 粉塵檢測儀 大氣顆粒物綜合采樣器 水樣抽濾器 紅外線氣體分析儀 液液萃取儀 揚塵在線監測儀 生物安全柜 黑煙識別器 COD消解儀 測油儀 流量計 口罩防護服測試類設備 核酸采樣工作站 流量校準儀 紅外門式測溫儀 空氣微生物采樣器 空氣環境采樣器 綜合大氣采樣器 粉塵顆粒物采樣器 大氣采樣器 國產水質采樣測試儀 油氣回收裝置 低濃度恒溫恒濕稱重系統 BFE PFE熔噴布口罩測試設備 水質采樣器 油煙檢測儀 煙塵煙氣檢測儀 檢測儀器 分析儀器 水分測定儀 土壤檢測儀
產品簡介
詳細介紹
青島路博tiffany
LB-3307 mask filtration efficiency testing device
Product introduction
LB-3307 mask filtration efficiency testing device is used to test the protection effect and filtration efficiency of daily protective masks and respirators on particulate matter. It is applicable to medical device inspection center, safety protection inspection center, labor protection inspection center, drug inspection center, disease prevention and control center, textile inspection center, hospital, mask and respirator manufacturing enterprises, etc.
Standards-compliant
GB 32610-2016 "Technical Specification for Daily Protective Mask"
GB 2626-2006 "Respiratory Protective Equipment-Self-priming Filtration Anti-particulate Respirator"
GB 19082-2009 "Technical Requirements for Medical Disposable Protective Clothing"
GB 19083-2010 Technical Requirements for Medical Protective Masks
YY 0469-2011 Medical Surgical Mask
Performance characteristics
1. The cold aerosol generator is used to generate continuous and stable aerosol particles, which is convenient for filling solution.
2. High precision laser sensor is used to measure aerosol concentration.
3, the whole process of particulate matter leakage prevention design, to protect the safety of laboratory personnel.
4.Two sets of aerosol generators: saline aerosol generator and oily aerosol generator.
5.Pneumatic clamp is equipped with protection device, which is safe and convenient to use.
6. Configure precision flowmeter and laser dust particle counter.
7. Detection range of filtration efficiency: 0-99.999%.
8. Filter efficiency detection flowmeter range (10-100)L/min, with accuracy of 2.5 grade.
9. Control system: friendly man-machine interface controls the test process and automatically collects data.
10. The system automatically tests the gas concentration and automatically calculates the filtration efficiency. Can save, output, query and print test data.
11. The color touch screen is easier to operate.
Technical parameter
Test flow range | 10-100L/min (standard temperature and pressure 32L/min) |
Test sample specification | 100cm2 |
Resistance test | 0-1500pa |
Efficiency test range | 0-99.999%, penetration rate 0.001% |
Test particle size | 0.3/0.5/1.0/2.5/5.0/10.0μm |
Fog dust source | Salt aerosol (NaCL), oily aerosol (DOP) |
Test time | Resistance shall be measured separately for 10s. Resistance and efficiency shall be measured for 60s at the same time |
Temperature and humidity | The temperature is 0-50 DEG C; Humidity 0-*RH |
Atmospheric pressure | 800-1100hpa |
Power | 220V/AC 50HZ |
Operation | Color touch screen, intelligent software |
Printing function | Print interface, optional HP1112 printer |
External air source | Optional 200L/min external pump |
Main configuration | Main engine, display screen, flow pump, saline aerosol generator, oily aerosol generator, differential pressure transmitter, flow transmitter, temperature and humidity sensor, electrostatic neutralization device, standard fixture, laser ion counter |