五月婷网站,av先锋丝袜天堂,看全色黄大色大片免费久久怂,中国人免费观看的视频在线,亚洲国产日本,毛片96视频免费观看

High Performance Design

These enhanced performance sensors are manufactured to exacting tolerances using high quality, rugged materials for demanding applications including ultra-pure water, clean-in-place (CIP), and boiler/condensate monitoring. Each sensor is tested to determine its unique, absolute four-digit cell constant. Simply key in this constant (Hach’s easy DRY-CAL™ method) when configuring the analyzer to ensure the highest possible measuring accuracy. Also, each sensor has a Pt 1000 RTD temperature element built into its tip for exceptionally fast response to changes in temperature with ±0.1ºC accuracy.

Resistivity and Conductivity Measurement Capability

These enhanced performance sensors measure from theoretically pure water (0.057 µS/cm or 18.2 MΩ) up to 200,000 µS/cm. Hach’s sc Digital Controllers accept multiple digital sensor inputs, and can be user-set to measure conductivity, resistivity,TDS, salinity, or one of six calculated measurements.

Versatile Mounting Styles

Compression fitting sensors—Feature titanium electrodes and a compression fitting for universal installation with up to 4 inches (102 mm) insertion depth. The 1/2-inch or 3/4-inch male NPT compression fittings are offered in Kynar® (PVDF) or 316 stainless steel. A longer version of this sensor is available for use with a 316 stainless steel ball valve hardware assembly to insert/retract the sensor from the process without stopping the flow. The longer version can also be used for insertion through a compression fitting. Maximum insertion depth is 7 inches (178 mm).

Full-Featured “Plug and Play” Hach sc Digital Controllers

There are no complicated wiring or set up procedures with any Hach sc controller. Just plug in any combination of Hach digital sensors and it's ready to use—it’s “plug and play.”

Specifications

Accuracy:± 2 % of reading above 200 μS/cm

Cable Length:6 m fixed cable (6 wire, 4 conductors and two isolated shield wires)

Diameter:0.5 in ( 12.7 mm )

Flow:0 to 3 m/s maximum, fully immersed

Length:7.6 in ( 193.5 mm )

Material:Compression Fitting: KYNAR (PVDF)

Measurement Range 2:0.002 to 20 MΩ resistivity

Operating Temperature Range:-20 to 200 °C

Pressure Limit:1.7 bar at 150 °C

Range:0 to 100 μS/cm conductivity

Repeatability:± 0.5 % of reading

Response Time T90:30 s

Sensor Immersion Depth:155 mm

Sensor Thread:NPT

Temperature Sensor:Pt1000 RTD

Transmission Distance:max. 100 m