熱變形維卡軟化點溫度測定儀-臺式3路     
編號：GD201311030076
規格：RBWK-300B
 
產品名稱：熱變形維卡軟化點溫度測定儀

產品型號：RBWK-300B

熱變形維卡軟化點溫度測定儀符合版本國家標準：

GB/T1633《熱塑性塑料軟化溫度(VST)的測定》

GB/T1634《塑料彎曲負載熱變形溫度試驗方法》

GB8802《硬聚氯乙烯(PVC-U) 管材及管件維卡軟化溫度測定方法》

ISO75 、ISO306 、ISO2507 等標準要求。

        ASTM1525 ASTM D648標準

產品概述：
熱變形維卡軟化點溫度測定儀主要是用位移傳感器代替老式百分表測量形變量，自動采集試驗數據，配有打印機。廣泛用于熱塑性塑料、硬橡膠和長纖維增強復合材料等熱變形溫度（HDT）和維卡溫度（VST）的測定。
    ● 單片機控制
    ● 三路數顯顯示
    ● 控溫范圍：室溫—300℃
    ● 升溫速率：120±10℃/h
    ●    50±5℃/h
    ●溫度精度：±0.5℃                           
    ● 溫度分辨率：0.1℃
    ● 變形范圍：0—2㎜
    ● 變形精度：0.01㎜
    ● 電動位移調零
    ● 自動采集實驗數據
    ● 內置式打印機。
    ● 負荷范圍：0.75N—49.03N
    ● 試驗跨距：80—120㎜連續可調

親，請繼續參閱英文資料

RNumber: GD201311030076

Specification: RBWK-300B

Product Name: VEKA thermal deformation softening point temperature testing instrument

Product type: RBWK-300B

The thermal deformation of VEKA tester in line with national standards for the latest version of softening point temperature:

GB/T1633 "thermoplastic plastic softening temperature (VST) measurement"

GB/T1634 "plastic bending load thermal deformation temperature test method"

GB8802 "hard polyvinyl chloride (PVC-U) method for the determination of softening temperature of pipes and fittings of VEKA"

ISO75, ISO306, ISO2507 and other standards.

ASTM1525 ASTM D648 standard

Product overview:

VEKA thermal deformation softening point temperature measuring instrument is mainly used displacement sensor to replace the old dial indicator measuring deformation, automatic test data collected, with printer. Widely used in plastic, deformation temperature composite heat hard rubber and reinforced with long fibers (HDT) and VEKA (VST) temperature determination.

The single chip microcomputer control

The three way digital display

● the range of temperature control: temperature - 300 ℃

The heating rate: 120 ± 10 ℃ /h

● 50 ± 5 ℃ /h

The accuracy of ± 0.5 ℃ temperature

● temperature: 0.1 ℃ resolution

● deformation range: 0 - 2 mm

● deformation precision: 0.01 mm

● electric zero displacement

Automatic acquisition of experimental data

The built-in printer.

● load range: 0.75N - 49.03N

● testing span: 80 - 120 mm continuous adjustable

The host: Desk