能量回饋式電子負載 EA-ELR 9000 3U 系列 | Electronic Load with Energy Recovery EA-ELR 9000 3U Series

此款由微處理器控制的高性能電子負載系列產品，具有研發和工業測試環境所需的所有典型功能。專為組件與產品測試而設計，如：半導體，模擬和數字電路，電源，電容，電池，燃料電池等的測試。提供所有關鍵操作模式，如：恒壓，恒流，恒功率和恒阻（CV, CC, CP, CR），使得本系列為自動測試臺和老化室使用的理想工具。而且，EA-ELR 9000系列還有一項*的現代化功能，即帶能量返回式逆變器功能。

測試過程中從直流源處提取的能量可被轉化成AC 20/230/240V 50/60 Hz。這個能量回饋到本地市電電網。并將交流電供給電網的其它設備。它的轉換效率>90%, 所以不會像普通電子負載一樣工作時產生100%的熱消散。還具有超快反應時間(<50 μs)，高系統靈活度和度，并提供模擬和數字接口控制設備，如基板上有標準的0-10V和USB接口，還有RS232，CAN，Ethernet, Profibus可選。從而使本產品成為測試環境下的多用途和節能工具。帶圖形顯示器和控制軟件的易操作人機界面（觸摸屏）可進行自動測試（排序/數據記錄）。

• 微處理器控制，且可編程

• 適用于實驗室，研發部，工業，自動測試臺，老化室使用

• 直流轉交流的以便功能，且?guī)芰炕仞?，可轉換到交流市電網

• 基板上有0-10V操作的模擬接口&USB接口

• 有CV, CC, CP, CR操作模式

• 內置序列發生器&數據記錄器，記憶功能

• 帶觸摸屏和編譯器的圖形顯示器（只管的易操作HMI人機界面）

• 即插即用數字適配卡插槽（有RS232，CAN，Ethernet，Profibus可選界面）

• 有控制軟件“easyload pro“ ，適合自動測試&數據記錄

• 使用外殼為19”機柜3U

• IEC 320 交流輸入插座，直流輸入端為M8螺柱，銅條或HV直流端子

顯示儀表（HMI） ：觸摸屏，圖形顯示器128 x 192 點數(W x H: 78 x 55 mm)

輸入電壓 ： 115/230V ~ @ 50/60 Hz

外殼尺寸 HxD ： 19” 3U, 深 595 mm

This high-performance μ-processor controlled electronic load series features all necessary functions typically required in demanding R&D and industrial testing environment. They are designed for the testing of components and devices such as semiconductors, analogue and digital circuits, power-supplies, capacitors, batteries, fuel cells etc. All crucial operation modes i.e. constant voltage-, current, -power and resistance (CV, CC, CP, CR) are provided, making this series and ideal tool for automated test benches and burn-in facilities. Moreover, EA-ELR 9000 series features a unique state-of-the-art inverter function with energy recovery.

The energy extracted from the DC source under testing is inverted and mains synchronised into AC 20/230/240V 50/60 Hz and this energy then feed back into the local mains power grid, enabling to supply AC power to djacent equipment on the grid. With an inverter efficiency of >90%, the enormous heat dissipation of 100% typically found at conventional electronics load is therefore almost eliminated. An ultra-fast response time (<50 μs), high system flexibility and precision, analogue and digital interface control facilities such as standard 0-10V and USB on board and RS232, CAN, Ethernet, Profibus optionally, make this series an extremely versatile and energy-efficient tool in testing environment. An easy-to-operate human interface (touch panel) with high-end graphic display and control software (optional) for automated testing (sequencing/ data logging) are provided.

• μ-processor controlled and programmable

• For laboratory, R&D, industry, automated test benches, burn-in facilities

• DC-to-AC Inverter function with energy recovery onto the AC mains power grid

• Analogue interface 0-10V & USB on board

• Operation modes CV, CC, CP, CR

• Integrated sequencer & data logger, memory functions

• Graphic display with touch panel and encoder (intuitive easy-to-use HMI)

• Plug’n play digital interface slot (Optional interfaces RS232, CAN, Ethernet, Profibus)）

• Control software “easyload pro“ for automated testing & data logging

• Housing 19” rack 3U

• IEC 320 AC input receptacle, DC input by M8 bolt, cupper bars or HV-DC terminal

Meters (HMI) ：Touch Panel, Graphic Display 128 x 192 points (W x H: 78 x 55 mm)

Input voltage ：115/230V ~ @ 50/60 Hz

Housing HxD ：19” 3U, depth 595 mm